Official Luthiers Forum! http://www-.luthiersforum.com/forum/ |
|
French Purfs http://www-.luthiersforum.com/forum/viewtopic.php?f=10102&t=5544 |
Page 1 of 1 |
Author: | Brock Poling [ Thu Mar 09, 2006 7:21 am ] |
Post subject: | |
As the box is on its way to me... I am unclear on what I am doing about the purfling. It was mentioned that we are using French Purflings, but I am not entirely clear what those are. Is it just a lay up of black and white? I have individual strands of black and white purflings and I could probably just put them on as loose pieces..... can someone 'splain this to me? ![]() |
Author: | Bruce Dickey [ Thu Mar 09, 2006 7:37 am ] |
Post subject: | |
Michael would have to tell us where he got these to be sure they are the same. I have cello purfling from International Violin Baltimore and they are identical material, but appear to be wider in the white area. So, French being bwb with the white smaller than the black. Time to go prospecting. Brock why don't you PM ol' Propsom, you know HiDraw Licks? I asked once before but since he sent some I didn't pursue it. Lemme go prospecting, I know LMI no go there. Will see if StewMac or Int'l Violin has em. |
Author: | Bruce Dickey [ Thu Mar 09, 2006 7:52 am ] |
Post subject: | |
http://www.internationalviolin.com/itemdrilldown.cfm?ssearch =purfling&stype=sim&itemsperpage=25&item=940F This sounds like it Brock. My cello purfling similar to Olson in the eighties came from here. These read right. Not at Stewmac or LMII. Notes: French style overall thickness approx. 1.3mm, Black 0.6mm white 0.4mm, black 0.6mm $2.15 each, doesn't state the length, talk to Ken Wise General Inquiries generalinfo@internationalviolin.com Product Information productinfo@internationalviolin.com Sales sales@internationalviolin.com Support support@internationalviolin.com International Violin Company, Ltd. 1421 Clarkview Road Suite 118 Baltimore, MD 21209-2187, USA www.internationalviolin.com Baltimore Maryland Toll Free (US) 1-800-542-3538 Phone: 410-832-2525 Fax: 410-832-2528 |
Author: | Michael Dale Payne [ Thu Mar 09, 2006 9:06 am ] |
Post subject: | |
I believe Bruce has it right. I have a Pm from Michael on theses I will go get it and post it. |
Author: | Michael Dale Payne [ Thu Mar 09, 2006 9:07 am ] |
Post subject: | |
French 1.3 mm oa.---- .6black/.4white/.6black |
Author: | Brock Poling [ Thu Mar 09, 2006 9:48 am ] |
Post subject: | |
oa? |
Author: | Bruce Dickey [ Thu Mar 09, 2006 10:36 am ] |
Post subject: | |
over all measurement 1.3mm |
Author: | Bruce Dickey [ Thu Mar 09, 2006 12:21 pm ] |
Post subject: | |
Brock's Address, I need it too.... Michael Propsom, Thanks man, that really helps out. Thank you very much. ![]() |
Author: | Brock Poling [ Fri Mar 10, 2006 1:55 am ] |
Post subject: | |
. |
Page 1 of 1 | All times are UTC - 5 hours |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |